6 Series E64 630i (N52) CONVER
41 12 535
Replacing complete rear luggage
compartment floor (tail panel removed)
Read contents of Body, General.
Refer to the description texts of the KSD CD (FRU 41 12 535)
for details of stripping-down and rigging work.
Spot-weld bonding is used on the E64. Observe specific
procedure.
Place vehicle on straightening bench.
Following new body parts are required (refer to EPC):
-
(1) Luggage compartment floor
-
(2) Support, luggage compartment floor, left
-
(3) Mounting, tension strut
-
(4) Support, luggage compartment floor, right
-
(5) Reinforcement, luggage compartment floor
-
(6) Sealing cap
-
(7) Holder, damping element (2 x)
View from vehicle floorpan:
Open weld joints in areas (1).
Open weld joints in areas (1).
RA Replacing complete rear luggage compartment floor (tail panel removed)
BMW AG - TIS
26.01.2013 04:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -