6 Series E64 630i (N52) CONVER
Note:
Carry over the work step shown symmetrically to the other side of
the car
Drill out rivets (1).
Open screws (2).
Remove carrier for bumper trim with deformation element (3).
Open screws (4).
Remove front wall holder (5).
Installation:
If necessary, use screws or locking pins (instead of rivets) to
secure deformation element.
RA Replacing front wall
BMW AG - TIS
26.01.2013 05:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
