6 Series E64 630i (N52) CONVER
Installation:
If necessary, use screws and locking pins (instead of rivets) to
secure deformation element.
Tightening torque 51 11 4AZ
.
Replacement:
•
Remove impact absorber
Depending on version:
•
Remove both acceleration sensors
•
Remove both high-pressure nozzles for headlight washer
system
•
Remove night vision camera
•
Remove bracket for ACC sensor
•
If necessary, remove both near range sensors
RA Removing and installing/replacing carrier for front bumper trim
BMW AG - TIS
26.01.2013 05:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
