6 Series E64 630i (N52) CONVER
51 13 316
Removing and installing/replacing trim strip
on roof gutter at left or right
Detach mucket (1) in area of trim strip (2).
Starting at front, snap trim strip (2) out of clips (3).
Installation:
To avoid leaks and noises, check all clips (3) for visible damage.
If necessary, replace faulty clips (3).
Carefully feed trim strip (1) out of mucket (2).
Installation:
Fitting trim strip (1):
-
Feed trim strip (1) into mucket in area (A).
-
Fit trim strip (1) on clips.
-
Insert rubber seal (2).
-
Snap trim strip (1) onto clips.
RA Removing and installing/replacing trim strip on roof gutter at left or right
BMW AG - TIS
26.01.2013 06:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
