6 Series E64 630i (N52) CONVER
51 21 225
Removing and installing or replacing inside
door opener in left or right front door
Press on point (A) of cover (1).
Tilt out cover (1) and release screw underneath.
Tightening torque 51 41 2AZ
.
Door opener (3):
-
lever out at catch (1)
-
slide in direction of arrow (A)
-
lever out at catch (2)
-
feed out in direction of arrow (B)
Disconnect Bowden cable (1).
If necessary, unlock and detach LED (2).
Remove door opener (3).
Installation:
When fitting Bowden cable (1), do not tighten lever of door
handle (3).
Installation:
Catches (1) for optical waveguide (2) must not be damaged.
RA Removing and installing or replacing inside door opener in left or right front d
BMW AG - TIS
26.01.2013 06:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
