6 Series E64 630i (N52) CONVER
51 43 201
Removing and installing/replacing panel for
roof pillar at front (A-pillar), left or right
Detach mucket (1) in area of panel (2).
Unclip panel (2) at fastening points (3).
Feed out panel (2) from instrument panel (4) and remove.
Installation:
If necessary, lever out clips (1) remaining in rail.
If necessary, replace faulty clips (1).
Make sure guides (3) of panel (2) are correctly seated in
associated mountings.
Position panel (2) preinstalled with clips (1) on associated bores
and clip into place.
RA Removing and installing/replacing panel for roof pillar at front (A-pillar), lef
BMW AG - TIS
26.01.2013 07:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -