6 Series E64 630i (N52) CONVER
51 43 075
Removing and installing / replacing side trim
panel, footwell, on A-pillar, right
Necessary preliminary tasks:
•
Remove front entrance cover strip (inside)
Detach mucket on door (1) in area of side trim panel (2).
Unclip side trim panel (2) in direction of arrow from retaining
points (3).
Remove side trim panel (2).
Installation:
If necessary, lever out clips (1) remaining in bores.
If necessary, replace faulty clips (1).
Position side trim panel (2) preinstalled with clips (1) on
associated bores and clip into place.
RA Removing and installing / replacing side trim panel, footwell, on A-pillar, righ
BMW AG - TIS
26.01.2013 07:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -