6 Series E64 630i (N52) CONVER
51 71 484
Removing and installing/replacing cross
strut/rear end
Necessary preliminary tasks:
•
Remove exhaust system
•
Remove rear left and right heat shields
Release nuts (1) and screws (2).
Tightening torque 51 61 6AZ
.
Remove cross strut (3) towards bottom.
RA Removing and installing/replacing cross strut/rear end
BMW AG - TIS
26.01.2013 07:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
