6 Series E64 630i (N52) CONVER
If necessary, unclip protective caps upwards.
Unfasten screws (3).
Move seat runners forward so that they are flush.
Unlock lock (1) and disconnect plug connection (2).
Caution!
Cover door sill with protective covers (risk of damage).
Lift out front seat.
Installation:
Floor carpet must not enter area between seat rails and floor
panel beside screw points (grating noises).
Tightening torque: 52 10 1AZ.
RA Removing and installing left or right front seat (normal / electric)
BMW AG - TIS
26.01.2013 07:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
