6 Series E64 630i (N52) CONVER
52 24 010
Removing and installing / replacing backrest
Necessary preliminary tasks:
•
Remove rear seat
•
Remove head restraint
•
Remove armrest
Release screws (1) on backrest.
Release screws (2) on seatbelt anchor fitting.
Tightening torque 72 11 22AZ
.
Note:
End of work when removing side trim panel and/or rear parcel
shelf.
Unlock detent lugs (1) on back and remove seatbelt outlet
trim (2).
Installation:
Replace seatbelt outlet trims in event of faulty detent lugs.
Feed seat belt (1) out of
(2)
Seatbelt outlet trim
(3)
Backrest
RA Removing and installing / replacing backrest
BMW AG - TIS
26.01.2013 08:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
