Removing and Installing Hydraulic Cylinder for Convertible Top
54 34 016
Removing and installing/replacing left or right
hydraulic cylinder for convertible top
Necessary preliminary tasks:
•
Remove EH convertible top
•
Position EH convertible top on special tool and close
Note:
The hydraulic cylinder is only accessible when the convertible top
is removed and closed.
If necessary, cut cable straps.
Installation:
Replace cable straps.
Remove circlip.
Drive bearing pin through.
Slide hydraulic cylinder (1) forwards in direction (2) and feed out
in direction (3).
RA Removing and installing/replacing left or right hydraulic cylinder for convertib
BMW AG - TIS
26.01.2013 08:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -