6 Series E64 630i (N52) CONVER
Attach hook (2) to convertible top frame.
To lift out the convertible top uniformly, make sure the special tool is aligned parallel to the convertible top.
If necessary, adjust the height via the left and right threaded rods.
Check that supports and hook are securely seated.
Carefully lift out convertible top with lifting apparatus.
Measure and note down adjustment depth of all castle nuts.
Replacement:
Carry over adjustment depth of all castle nuts to new convertible
top.
On reinstallation:
Check adjustment depth prior to installation.
After body repair work:
Adjust convertible top.
Installation:
Observe installation of kinematics box.
Carry out function check.
Check gap dimensions.
RA Removing and installing complete EH convertible top
BMW AG - TIS
26.01.2013 08:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -