6 Series E64 630i (N52) CONVER
61 12 067
Replacing wiring harness for rear bumper
Necessary preliminary tasks:
•
Partially remove luggage compartment wheel arch trim on left
.
•
Remove rear bumper trim
Unlock and disconnect plug connections (1) from ultrasonic
converter.
Unlock and disconnect plug connections (2) on number/licence
plate lights.
Unlock and disconnect plug connections (3) from rear lights.
Installation:
Make sure wiring harness is correctly laid.
RA Replacing wiring harness for rear bumper
BMW AG - TIS
26.01.2013 08:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -