6 Series E64 630i (N52) CONVER
Release screws (1).
Pull back fixture for steering column switch (2) in direction of
arrow.
Disconnect plug connections behind and remove fixture for
steering column stalk (2).
Replacement:
•
Remove turn indicator/headlight dipping switch
•
Remove windshield wiper switch
•
If necessary, remove cruise control switch
•
Remove volute spring cassette
Replacement:
•
Carry out programming/coding
•
Vehicles without active front steering:
•
Carry out steering angle sensor adjustment
•
Vehicles with active front steering:
•
Carry out active front steering start-up/adjustment.
RA Removing and installing/replacing fixture for steering column stalk (up to 09/20
BMW AG - TIS
26.01.2013 09:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -