6 Series E64 630i (N52) CONVER
63 17 060
Removing and installing (replacing) left or
right front fog lamp
Necessary preliminary tasks:
•
Remove front underbody protection
Release screws (1).
Remove fog lamp wheel arch cover (2).
Build date up to 09/2007:
Disconnect plug connection (1).
Release screws (2). Tightening torque 63 17 1AZ
.
Feed fog lamp (3) in direction of arrow out of mounting (4) and
remove.
Build date after 09/2007:
Note:
Bumper trim shown removed for purposes of clarity.
Disconnect associated plug connection.
Left fog lamp: Partially remove wheel arch cover in area of fluid
reservoir for windscreen washer unit. Insert a suitable tool
between fluid reservoir for windscreen washer unit and bumper
trim.
Release screw (1). Tightening torque
63 17 1AZ
.
RA Removing and installing (replacing) left or right front fog lamp
BMW AG - TIS
26.01.2013 12:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
