6 Series E64 630i (N52) CONVER
Remove soundproofing from left A-pillar (1) in direction of arrow.
Release screws (2).
Remove left air duct (4) in direction of cold-air distributor (3).
Remove soundproofing from right A-pillar (1) in direction of
arrow.
Release screws (2).
Remove right air duct (4) in direction of cold-air distributor (3).
Carefully lever out locks (1) and (2).
Detach cold-air distributor (3) in direction of arrow.
Installation:
Make sure cold-air distributor (3) is correctly seated.
Important!
Follow instructions for handling optical fibers.
RA Removing and installing or replacing heater
BMW AG - TIS
26.01.2013 13:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -