6 Series E64 630i (N52) CONVER
64 53 551
Removing and installing/replacing condenser
for A/C system
Warning!
Risk of injury!
Refrigerant circuit is under high pressure!
Follow safety instructions for handling R 134a refrigerant .
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant oil.
Important!
Risk of damage!
Restart engine only when A/C system has been correctly
filled.
Follow instructions for opening and replacing parts in
refrigerant circuit!
If A/C system is opened for more than 24 hours:Replace
desiccant insert for A/C system
Necessary preliminary tasks:
•
Drawing off, evacuating and filling the A/C system is not
included in the time value given for this work operation
•
Remove radiator cover
Release screws (1) and remove lines (2) in direction of arrow.
Tightening torque 64 53 6AZ
.
Pull out condenser.
RA Removing and installing/replacing condenser for A/C system
BMW AG - TIS
26.01.2013 13:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -