6 Series E64 630i (N52) CONVER
Unfasten plug connection (1) and disconnect.
Installation:
Do not mix up antenna connectors (2).
Mark antenna plugs (2) and disconnect.
Release screws (3).
Feed video module for on-board monitor (4) out of holder (5)
and remove.
Replacement:
Carry out programming/coding.
RA Removing and installing (replacing) video module for on-board monitor
BMW AG - TIS
26.01.2013 13:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
