6 Series E64 630i (N52) CONVER
Disconnect plug connections (1)
Disconnect Bowden cable (2).
Press in button (3) and lift storage compartment (4) out of centre
armrest.
Disconnect Bowden cable (1).
Installation:
Make sure Bowden cable is correctly guided.
Release screws (1).
Disconnect plug connections (2) and remove vehicle
centre sensor (3).
Tightening torque 65 77 6AZ
.
Replacement:
Carry out programming/coding.
RA Removing and installing (replacing) vehicle centre sensor
BMW AG - TIS
26.01.2013 13:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -