6 Series E64 630i (N52) CONVER
interrupted just before this point.
Once the obstruction has been removed, adjustment can again extend beyond the newly detected limit stop
when the seat adjustment button is pressed again.
Rear easy-entry facility
The rear easy-entry facility is controlled by a push-button on the seat backrest. The rear easy-entry facility can
be activated only under the following conditions:
•
The vehicle must be stationary with no wheels turning
•
The door must be opened
Rapid adjustment is achieved with the second speed stage of the drive unit for seat forward/backward
adjustment. The seat moves for as long as the button is pressed. At the same time, the backrest can be
released manually and folded forward.
The seat moves back to its initial position when the seat adjustment button is pressed back.
Seat heating
The seat heating system heats the seat cushion and backrest including the side sections. Separate seat heating
switches (push-buttons) in the centre console switch cluster (SZM) control the driver's seat and passenger's
seat.
The centre console switch cluster controls the seat heating electronically. The system is monitored by a
temperature sensor. The seat heating is operational as from terminal 15 "ON".
3 LEDs located above the seat heating switches indicate the heating stage currently active in the seat heating
system.
Note: The seat heating is not actuated while the steering column is adjusted.
The current at the centre console switch cluster would be too high if the seat heating and steering column
adjustment were operated simultaneously. The seat heating is interrupted in order to protect the centre
console switch cluster (SZM).
Notes for service staff
Service staff should note the following points:
-
General information: ---
-
Diagnostics: ---
-
Encoding/programming: ---
-
Car and key memory [more ...]
Subject to change.
SBT Electrically adjustable seats E63, E64
BMW AG - TIS
26.01.2013 22:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
