6 Series E64 630i (N53) CONVER
11 41 010
Removing and installing or replacing chain
module for oil pump/vacuum pump (N53)
Special tools required:
•
11 0 290
•
11 0 300
•
11 4 120
•
11 4 280
•
11 5 200
•
11 8 640
•
11 8 650
•
11 9 280
Important!
Aluminium screws/bolts must be replaced each time they are
released.
The end faces of aluminium screws/bolts are painted blue for
the purposes of reliable identification.
Jointing torque and angle of rotation must be observed
without fail (risk of damage).
Necessary preliminary tasks:
•
Remove cylinder head cover.
•
Remove engine oil sump.
•
Remove drive belt.
•
Remove tensioner for drive belt.
•
Remove vibration damper at front.
•
Remove sealing cover for vacuum pump.
•
Remove chain tensioner.
RA Removing and installing or replacing chain module for oil pump/vacuum pump (N53)
BMW AG - TIS
30.01.2013 06:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
