6 Series E64 630i (N53) CONVER
Important!
Note installation direction of sprocket wheel (2).
Collar on sprocket wheel (2) points to timing chain drive.
Incorrect assembly will result in engine damage.
Feed in oil pump chain module.
Secure oil pump chain module with screws (2).
Tightening torque: 11 41 4AZ
.
Secure screw (1) with special tool 11 8 640 .
Tightening torque: 11 41 4AZ
.
Fit central bolt (1).
Install special tools 11 8 650 and 11 0 290.
Tighten bolt (1).
Tightening torque: 11 66 5AZ
.
RA Removing and installing or replacing chain module for oil pump/vacuum pump (N53)
BMW AG - TIS
30.01.2013 06:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -