6 Series E64 630i (N53) CONVER
12 14 523
Replacing pulse generator on inlet camshaft
(N54)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
Remove fan cowl
Unlock plug (1) and remove.
Release screw.
Tightening torque 12 14 3AZ
.
Remove pulse generator (2).
Note:
Check stored fault messages.
Now clear the fault memory.
RA Replacing pulse generator on inlet camshaft (N54)
BMW AG - TIS
30.01.2013 06:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -