6 Series E64 630i (N53) CONVER
Installing new clutch
Important!
Locking piece may only be removed clutch is screwed down!
Installation:
Screws must be replaced.
Jointing torque and angle of rotation must be observed without
fail.
Centre clutch plate (1) with special tool.
Important!
Install clutch plate in correct position.
Note designation for "engine side" / "transmission side".
Handle clutch plate with care. Do not touch surfaces of friction
linings.
Special tool
Transmission
21 2 201
GS6-37BZ; GS 6-17BG
21 2 230
GS6-53DZ/BZ
21 2 141
S5D 390Z
21 2 250
GS6-17BG
Fit clutch to flywheel.
Tightening torque 21 21 1AZ
.
Important!
Clutch must be secured by way of dowel pins (1).
RA Removing and installing/replacing clutch (SAC)
BMW AG - TIS
30.01.2013 07:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
