6 Series E64 630i (N53) CONVER
Version with active steering:
Disconnect plug connections (1, 2).
Expose wiring harness (3) up to front axle carrier.
Warning!
Danger of injury!
Failure to comply with the following instructions may result
in the vehicle slipping off the lifting platform and critically
injuring other persons.
When supporting components, make sure that
•
the vehicle can no longer be raised or lowered
•
the vehicle does not lift off the locating plates on the
lifting platform
If necessary, position special tool 00 2 040 with a 2nd person
helping on workshop jack 00 2 030 .
Insert special tools 31 4 012 into corresponding receptacles of
special tool 00 2 040 .
Align special tool 00 2 040 to front axle subframe.
Note:
Make sure when raising that the special tools 31 4 012 are
correctly inserted in the rear recesses on the front axle carrier.
Support front axle carrier in rear area by raising special tool
00 2 040 .
Position special tool 33 3 274 on floor jack mounting.
Important!
Pay attention to power steering hoses and lines when
lowering and raising. Hoses/lines must not be
kinked/tensioned/bent!
RA Lowering/raising front axle carrier
BMW AG - TIS
30.01.2013 08:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
