6 Series E64 630i (N53) CONVER
Pull off bumper trim (1) towards front.
Version without headlight cleaning system:
If necessary, disconnect plug connections on fog lamps (2)
and/or Park Distance Control (3).
Remove bumper trim (1) towards front (with aid of a 2nd person).
Version with headlight washer system:
Note:
Have a rubber plug on hand.
Unlock hose (1), detach and seal pump outlet (2).
Remove bumper trim towards front (with aid of a 2nd person).
Installation:
Tabs (1) on bumper trim (2) must not be damaged.
RA Removing and installing front bumper trim
BMW AG - TIS
30.01.2013 12:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -