6 Series E64 630i (N53) CONVER
Screws (1) and nut (2) fall out easily; secure with body sealing
compound if necessary.
Release screws (1) with Torx T30.
Release nut (2) with special tool 41 6 120 .
Remove door window glass (3) towards top.
Tightening torque:
1
51 37 2AZ
2
51 37 7AZ
Installation:
If necessary, replace adjusting screw (1).
Initial adjustment of pretension:
Attach adjusting screw (1) until flush on outside.
Check function.
Adjust rear door window.
RA Replacing rear left or right side window
BMW AG - TIS
30.01.2013 13:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -