6 Series E64 630i (N53) CONVER
51 43 012
Removing and installing rear left or right side
trim panel upper section
Special tools required:
•
00 9 317
Open convertible top and convertible top compartment lid.
Rear seat bench shown removed for purposes of clarity.
Release screw (1) on side trim panel upper section (2).
Disengage frame (3) from holder for convertible top frame (4) in
direction of arrow.
Installation:
Catch on frame (3) must not be damaged.
Release mucket (1).
Installation:
Make sure mucket (1) is correctly seated.
Release screw (2).
Carefully lever side trim panel upper section (3) with special tool
00 9 317 upwards out of retainers (4).
Carefully unclip catches (1) upwards with special tool 00 9 317 .
Feed out side trim panel upper section (2) towards top and
remove.
Installation:
Catches (1) and ribs (3) must not be damaged.
RA Removing and installing rear left or right side trim panel upper section
BMW AG - TIS
30.01.2013 13:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
