6 Series E64 630i (N53) CONVER
51 45 185
Removing and installing/replacing panel for
pedals
Release screws (1).
Unclip trim for pedal assembly (3) at retaining points (2).
Pull back panel for pedals (3) in direction of arrow.
Disconnect associated plug connections and remove trim for
pedal assembly (3).
Important!
Disconnecting the plug connection for the hands-free system
speaker results in fault memory entries in the telephone
control unit (limitation in the emergency SOS call system).
After fitting, read out fault memory and if necessary delete
entries.
Installation:
Guides (1) and clips (2) of trim for pedal assembly (3) must not
be damaged.
Replacement:
•
Remove speaker of hands-free system (4).
•
Remove footwell light (5).
RA Removing and installing/replacing panel for pedals
BMW AG - TIS
30.01.2013 13:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -