6 Series E64 630i (N53) CONVER
-
while control switch in instrument panel is pressed
Positioning removed convertible top:
Mount convertible top holders 54 3 140 on support tube
54 3 201 and fit on universal lifter 00 2 030 .
Important!
Use special tools only in conjunction with universal lifter
00 2 030 .
There is a risk of tilting over if other lifting equipment is used.
Important!
Pay attention to cables and hydraulic lines when fitting
convertible top.
Cables/lines must not be trapped.
Place convertible top over threaded bolts.
Secure convertible top with original nuts.
Suspend kinematics box at side from special tool 54 3 140 .
Important!
Always move the convertible with a 2nd person helping (risk
of damage).
Make sure force is always exerted uniformly to the convertible
top sides otherwise the frame will be bent.
Raise convertible top at main pillars and close.
RA Notes on convertible top
BMW AG - TIS
30.01.2013 14:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -