6 Series E64 630i (N53) CONVER
54 34 085
Adjusting (tensioning) control element
Necessary preliminary tasks:
•
Relieve tension on control element
•
Close convertible top completely
Move a piece of paper between pin and guide in marked area (3).
Tension control element (1) by turning.
Tension control element (1) until contact can be felt between pin,
paper and guide.
Remove paper and tension control element (1) by another 1/2
turn.
Tighten lock nut (2).
RA Adjusting (tensioning) control element
BMW AG - TIS
30.01.2013 15:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
