6 Series E64 630i (N53) CONVER
54 34 205
Removing and installing/replacing all
hydraulic lines on convertible top
Necessary preliminary tasks:
•
Support convertible top compartment lid in service position
•
Follow repair instructions for hydraulic system
Caution!
Hydraulic fluid may emerge from the disconnected lines and
the open connections on the hydraulic cylinder.
Protect components and work area with suitable materials
(e.g. cloths).
Note:
The right side is removed in the same way as the left side.
Disconnect required cable straps.
Installation:
Replace cable straps.
Transposed lines are not permitted.
If necessary, feed out moulded part (1).
Convertible top hydraulics:
RA Removing and installing/replacing all hydraulic lines on convertible top
BMW AG - TIS
30.01.2013 15:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -