6 Series E64 630i (N53) CONVER
61 12 200
Replacing wiring harness in left or right front
door
Necessary preliminary tasks:
•
Close front side window completely
•
Remove luggage compartment floor trim panel
•
Disconnect battery negative lead
•
Remove trim on armrest of front door
•
Remove rocker switch for side window operation
•
Remove front door trim panel
•
Remove front acoustic insulation
Unlock plug connection (3) for outside door mirror and
disconnect.
Disconnect cable ties (1) and feed out wiring harness for outside
door mirror.
Unlock and disconnect plug connection (2) for speaker.
Unlock and disconnect plug connection (4) for power window.
Disconnect plug connection (5) on door pressure sensor.
Installation:
Make sure door wiring harness is correctly laid.
Unfasten plug connection (1) and disconnect.
Unclip wiring harness (2) at points (3).
Installation:
Make sure wiring harness is correctly laid.
RA Replacing wiring harness in left or right front door
BMW AG - TIS
30.01.2013 16:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
