6 Series E64 630i (N53) CONVER
63 12 010
Removing and installing or replacing left
headlight (xenon headlight)
Warning!
Version with xenon headlights: Danger to life due to high
voltage! Therefore, before removing, disconnect all
components from the power supply (lighting system and
ignition off).
Work on the entire xenon lighting system (control unit, ignition
unit with bulb) may only be carried out by specialist personnel.
Follow instructions for handling light bulbs (exterior lights).
Necessary preliminary tasks:
•
Remove front bumper trim.
Note:
Direction indicator (4) remains fitted.
Release screws (1). Tightening torque
63 12 3AZ
.
Release screw (2), gripping the threaded expander nut with a
suitable tool in so doing. Tightening torque 63 12 8AZ
.
Pull headlight (3) forwards slightly.
Disconnect associated plug connection and feed out
headlight (3) in direction of arrow and remove.
Installation:
Adjust headlight to fit by way of the four screw fastening points.
Observe gap dimensions.
Adjust headlight.
RA Removing and installing or replacing left headlight (xenon headlight)
BMW AG - TIS
02.02.2013 15:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
