6 Series E64 630i (N53) CONVER
63 12 860
Replacing control unit for left xenon headlight
Warning!
Version with xenon headlights: Danger to life due to high
voltage! Therefore, before removing, disconnect all
components from the power supply (lighting system and
ignition off).
Work on the entire xenon lighting system (control unit, ignition
unit and lamp) may only be carried out by specialist
personnel.
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove left headlight
Build date up to 09/2007:
Release screws (1). Tightening torque
63 12 4AZ
.
Remove control unit for xenon headlight (2) from headlight (3).
RA Replacing control unit for left xenon headlight
BMW AG - TIS
02.02.2013 16:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -