6 Series E64 630i (N53) CONVER
63 25 000
Removing and installing/replacing
supplementary brake light (up to 09/2007)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove panel for rear lid
Unlock retaining clips (1) on both sides with a suitable tool (e.g.
pointed pliers) and simultaneously press towards rear slightly.
Installation:
Make sure supplementary brake light engages correctly in rear lid.
Disconnect plug connection (1).
Release locking hooks (2) on both sides, pull supplementary
brake light (3) towards rear out of rear lid and remove.
RA Removing and installing/replacing supplementary brake light (up to 09/2007)
BMW AG - TIS
02.02.2013 16:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -