6 Series E64 635d (M57T2) CONVER
17 11 370
Removing and installing/replacing cooling
loop for power steering
Necessary preliminary tasks:
•
Remove module carrier
Recycling:
Catch and dispose of hydraulic fluid.
Observe country-specific waste-disposal regulations.
Release retaining clip (1) on left.
Release screws.
Important!
Risk of damage to connecting pipes.
Carefully press cooling loop (2) on right towards front, then unclip
on left and remove from module carrier (3).
RA Removing and installing/replacing cooling loop for power steering
BMW AG - TIS
02.02.2013 21:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -