6 Series E64 635d (M57T2) CONVER
54 34 130
Removing and installing or replacing
headlining in convertible top
Necessary preliminary tasks:
•
Remove cowl panel trim (convertible top fastener)
•
Support convertible top compartment lid in service position
Unfasten screws.
Release Torx screw (1) from front strap on left and right.
Installation:
Replace Torx screws and insert with Loctite.
Convertible top rod (bow), front:
Unfasten screws.
RA Removing and installing or replacing headlining in convertible top
BMW AG - TIS
03.02.2013 04:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -