6 Series E64 635d (M57T2) CONVER
Rear seal:
Drill out rivets between seal (window guide).
Remove seal with rail and remove remnants of rivets.
Installation:
Because of larger rail depth, attach a nut as adapter between rivet
and riveting pliers for riveting purposes.
Important!
Risk of damage to door window glass or to seal (window
guide): Make sure there are no parts protruding from rivet.
Rivet shank must be correctly torn off.
Note:
Marking tension cable fixture before releasing.
Release Torx screw.
Installation:
Turn tension cable fixture during installation into position (1)
shown marked.
Replace Torx screw and insert with Loctite.
Tightening torque 54 34 13AZ
.
Release screws (1).
Pull welt (3) out of convertible top cover.
Remove seal (2).
Installation:
Stick welt (3) of seal in convertible top cover with cyanacrylate
adhesive (fast-action adhesive).
Follow repair instructions for bonded seals.
Dust seal:
Detach seal (1) from fin.
Installation:
Follow repair instructions for bonded seals.
RA Replacing all rubber window seals on convertible top frame
BMW AG - TIS
03.02.2013 04:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -