6 Series E64 635d (M57T2) CONVER
54 34 310
Removing and installing/replacing seal for
rear window
Necessary preliminary tasks:
•
Remove air outlet trim grill
Open convertible top compartment until all hydraulic cylinders are
extended.
Support convertible top compartment lid in service position.
Seal on rear window module:
Release left and right screws (1).
Remove cover (2) on left and right.
Release left and right screws (1).
Installation:
Replace Torx screws and insert with Loctite.
Detach seal towards top from rear window module.
RA Removing and installing/replacing seal for rear window
BMW AG - TIS
03.02.2013 04:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
