6 Series E64 635d (M57T2) CONVER
54 34 ...
Topping up/extracting fluid, checking fluid
level
Note:
No changing of the hydraulic fluid necessary.
-
The hydraulic fluid does not have to be changed because the
system is filled with life-time fluid.
-
Only the approved hydraulic fluid may be used in the event of
leaks.
Note:
All hydraulic cylinders must be completely extended.
Support convertible top compartment lid in service position.
Checking fluid level:
Unfasten screws.
Installation:
Replace Torx screws and insert with Loctite.
Unclip front cover (1) for hydraulic unit.
Fluid level must be within the markings (arrow) when the unit is
horizontal.
RA Topping up/extracting fluid, checking fluid level
BMW AG - TIS
03.02.2013 04:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -