6 Series E64 635d (M57T2) CONVER
61 35 950
Removing and installing (replacing) control
unit for comfort access system
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Note:
The comfort access system is a radio-based system and can be
interfered with by radio waves from other systems (e.g. mobile
phone).
Necessary preliminary tasks:
•
Remove luggage compartment floor trim panel
•
Disconnect battery negative lead
•
Remove trim for instrument panel, bottom left
Unfasten plug connection (1) and disconnect.
Unlock catch (2) in direction of arrow and remove control unit for
comfort access system (3) from device carrier (4).
Installation:
Make sure control unit (3) is correctly seated in device
carrier (4).
Replacement:
Carry out programming/coding.
RA Removing and installing (replacing) control unit for comfort access system
BMW AG - TIS
03.02.2013 06:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -