6 Series E64 635d (M57T2) CONVER
11 12 Cylinder Head with Cover
Type
Thread
Tightening specification
Measure
1AZ Cylinder head bolts
M57T2
M12x1.5
(L=217)
Replace screws
Tighten bolts from middle
in diagonal sequence in
outward direction.
Jointing torque
80 Nm
Release all bolts min. 180
°
from outside inwards
Jointing torque
50 Nm
1. Angle of rotation
90
°
2. Angle of rotation
90
°
2AZ HVCA seal plug
M57T2
M14x1.5
Replace screws
30 Nm
AZD Cylinder Head with Cover
BMW AG - TIS
03.02.2013 15:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -