6 Series E64 645Ci (N62) CONVER
Lift out eccentric shaft (1).
Removal of magnet wheel (if necessary):
Note:
Carefully clamp eccentric shaft (1) as illustrated with protective
jaws (2) in a vice.
Important!
Danger of mix-up:
It is very easy to mix up left and right or front and rear on the
eccentric shaft.
If necessary, mark the side on which the magnet wheel is fitted.
Note:
Magnet wheel (1) is extremely magnetic.
After removal, place magnet wheel in a plastic bag to protect it
against metal chips.
Release screw and remove magnet wheel (1).
Important!
Needle bearings (1) break off very easily when removed and
installed.
Carefully press needle bearings (1) apart at split position only to
such an extent that they can be removed from eccentric shaft.
RA Removing and installing/replacing left eccentric shaft (N62 from 9/03 and N62TU)
BMW AG - TIS
04.02.2013 04:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
