6 Series E64 645Ci (N62) CONVER
11 72 000
Removing and installing/replacing air pump
(N62)
Remove upper section of intake filter housing.
Release retaining screws on coolant expansion tank.
Remove suction filter housing.
Remove raw air housing.
Unlock and disconnect pressure and suction lines (1).
Loosen screws (2).
Loosen screw (3).
Remove front splash guard.
Remove trim panel at bottom right.
Unlock plug (1) and remove.
Unscrew bolt (3).
Remove air pump (2).
RA Removing and installing/replacing air pump (N62)
BMW AG - TIS
04.02.2013 04:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
