6 Series E64 645Ci (N62) CONVER
12 90 100
Replacing fan for electronics box (N62,
N62TU)
Necessary preliminary tasks:
•
Read out fault memory with MoDiC or BMW DIS; if
necessary, work through test schedules
•
Switch off ignition
•
Follow instructions for disconnecting and connecting battery
Disconnect battery
•
Remove right fresh air duct
Important!
Follow instructions for removing and installing control units
Unlock stopper (1) in direction of arrow.
Unfasten screws.
Lift out cover (2).
Unlock and detach plug connections (2) on supply module (1).
Unlock and detach plug connections (3) on DME control unit (4).
Unlock and detach plug connections (6) on Valvetronic control
unit (5).
Place wiring harness to one side.
RA Replacing fan for electronics box (N62, N62TU)
BMW AG - TIS
04.02.2013 05:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
