6 Series E64 645Ci (N62) CONVER
Withdraw special tool from clutch plate with aid of accompanying
screw (1).
Installing removed clutch with new clutch plate:
Installation:
Screws must be replaced.
Jointing torque and angle of rotation must be observed without
fail.
Important!
Before installing a used clutch with a new clutch plate, always
reset adjustment ring in new position.
Set clutch down on a clean surface.
Insert special tool 21 2 180 in clutch (1).
RA Removing and installing/replacing clutch (SAC)
BMW AG - TIS
04.02.2013 06:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
