6 Series E64 645Ci (N62) CONVER
Pull bumper trim (1) slightly towards front with aid of a 2nd
person.
Disconnect plug connections on fog lamps (2).
Disconnect Park Distance Control (PDC) in area (3).
Remove bumper trim (1) towards front with aid of a 2nd person.
Version with headlight washer system:
Note:
Have a rubber plug on hand.
Unlock hose (1), detach and seal pump outlet (2).
Remove bumper trim towards front with aid of a 2nd person.
Installation:
Tabs (1) on bumper trim (2) must not be damaged.
RA Removing and installing front bumper trim
BMW AG - TIS
04.02.2013 11:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
