6 Series E64 645Ci (N62) CONVER
51 13 115
Removing and installing/replacing cowl panel
cover
Necessary preliminary tasks:
•
Remove both windshield wiper arms
•
Remove lower microfilter housing section on left and right
Release clip on left/right.
Turn quick-release fasteners (2) approx. 90
°
counterclockwise.
Note:
The fastener is closed if the arrow tips point to each other.
Unscrew bolt (1).
Remove cowl panel cover towards top.
Installation:
Tighten down screw (1) to tightening torque 51 13 5AZ
.
Check cover (3) for correct seating.
Tighten quick-release fasteners (2) from the middle.
RA Removing and installing/replacing cowl panel cover
BMW AG - TIS
04.02.2013 11:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
