6 Series E64 645Ci (N62) CONVER
51 17 010
Removing and installing/replacing left or right
seal on convertible top compartment lid
Necessary preliminary tasks:
•
Remove trim on convertible top compartment lid
Carefully pull left/right seal (1) off trim (2) in upwards direction.
Note:
Clean adhesive residue with adhesive remover (sourcing
reference: BMW Parts Service).
Important!
Adhesive areas must be dry and free of dust and grease.
Once it has been cleaned, do not touch the adhesive area
with bare hands.
Installation:
Stick double-sided acrylate/polyester film (sourcing reference:
BMW Parts Service) to shaded area (1) of seal (2).
Pull off liner (protective strip for adhesive surface) and stick
seal (1) on convertible top compartment lid trim (2).
Important!
Seal (1) must be fitted flush with convertible top
compartment lid trim (2).
RA Removing and installing/replacing left or right seal on convertible top compartm
BMW AG - TIS
04.02.2013 11:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
